The Stress and deformation analysis of the brake pedal using Finite Element Method

Authors

  • SEYRAN ASANOV Turin Polytechnic University in Tashkent

Keywords:

brake pedal, FEM, Finite Elements Method, stress analysis, strain analysis

Abstract

Brake pedal is one of the most crucial components of the braking system of all types of vehicles.During the design phase it is of vital importance to make sure that the pedal is able to withstand the loads exerted by the driver during the deceleration process. Moreover, the pedal must be "ready" to withstand large loads in a hard braking process. This article describes the static stress and deformation analysis of the brake pedal with the help of Finite Elements Method (FEM). The paper summarises that a safe region of stress and deformation is achieved even when a force of 1100 N is applied at the brake pedal.

References

N. Abdukarimov S. Asanov S. Ro’zimov, J. Mavlonov.

SOLIDWORKS dasturida avtomatik loyihalash asoslari.

Tashkent, TTPU, 2021.

S.Ruzimov J.Sodiqov R. Mukhammadaliev. U.Selgren

Sh.Andersen, S.Eshkabilov. UGS I-DEAS NX Series programma

komplekslarida avtomatik loyihalash asoslari

(in Uzbek). Tashkent, Fan, 2006.

www.solidworks.com. 3ds [online].

K. Nisbett R. Budynas. Shigley’s mechanical engineering

design, 8th edition.,m. New York: McGraw-Hill,

Downloads

Published

2021-09-01

How to Cite

ASANOV, S. (2021). The Stress and deformation analysis of the brake pedal using Finite Element Method. Acta of Turin Polytechnic University in Tashkent, 11(3), 30–32. Retrieved from http://acta.polito.uz/index.php/journal/article/view/64

Issue

Section

Technical Science and Engineering