The application CAD CAM tools for Product Life Cycle Management (PLM)
Keywords:
Computer Aided Design (CAD). Computer Aided Manufacturing (CAM), Product Life Cycle Management (PLM).Abstract
Recently, computer-aided design and computer aided manufacturing (CAD/CAM) is largely applied in product development cycle due to the accelerated development of digitalization technologies. Owing to the technical application of CAD/CAM tool in the industry, enterprises have progressively changed their traditional approaches to design and manufacture of products. Proper Application of the CAD/CAM tools in production stages minimizes to a greater extent the production cost, lead time and delivers good quality products.
The CAD environment provides capabilities of designing product 3D model by feature-based design and obtaining product data. The product digital model is displayed in the modeling environment before transferring it downstream to the manufacturing module. The CAM environment gives the use of software to control machine tools and related ones in the manufacturing of work piece. In this paper, the CAD/CAM technology was briefly introduced and the CAD/CAM tools were applied in modeling and manufacturing of the plastic part.
References
A. Naumov и Z. Pandilov, «Benefits of implementation of flexible automation and CAD/CAM systems in metal processing companies,» Mechanical Scientific Engineering Journal, v. 33, № 1, pp. 91-102, 2015.
P. Chwastyk и M. Kolosowk, «Integration CAD/CAPP/ CAM system in design process of innovative products,» International Proceeding Conference 23rd International, pp. 397-400, 2012.
M. Usman, S. Abdulrahaman, A. Nuhu и A. Musa, «Application of CAD/CAM Tools in the Production of Investment Casting Part,» IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), v. 13, № 1, pp. 38-40, 2016.
V. Naiara и S. Gustavo, «CAD/CAM SOFTWARE ANALYSIS: COMPARISON, PERFORMANCE AND APPLICATION IN A MANUFACTURING PROCESS,» 24th ABCM International Congress of Mechanical Engineering, 3-8 December 2017.
J. Kong и Y. Song, «ANALYSIS ON THE APPLICATION OF MODERN MANUFACTURING-ORIENTED CAD/CAM,» Journal of Theoretical and Applied Information Technology, v. 50, № 3, 2013.
N. A. Hamzah, N. A. Abd Razak и M. S. Ab Karim, «A review of history of CAD/CAM system application in the production of transtibial prosthetic socket in developing countries (from 1980 to 2019),» Proceesings of the Institution of Mechanical Engineering, v. 235, № 12, 2021.
