DESIGNING A DIGITAL PROTOTYPE OF TRACTOR IN THE SOLIDWORKS ENVIRONMENT TO CREATE A VIRTUAL SIMULATION OF MOVEMENT ON VARIOUS SLOPES

Authors

  • Shahodat Ikhsanova Uzbek
  • Jakhongir Norkulov

Keywords:

3D modeling, digital prototype, four-wheel tractor, slope, deformation, wheel movement, elastic wheel, reactive mo-ment, wheel deflection, wheel rolling on a slope.

Abstract

This work shows the process of creating a digital prototype of a tractor using the SolidWorks simulation program. Also the movement of a four-wheeled tractor on different slopes is shown. Taking into account the masses of the front and rear wheels of the tractor, loads, moment of resistance, force resistance were calculated, as well as the deflection of the wheel tire when the unstable elastic wheel was turned on a slope under the influence of the side component of the load was analyzed

References

J.Sh.Norkulov, Sh.Z.Ihsanova and A.K. Karimov , The Study of the slope movement of a Four-Wheeled Trac-tor, Acta of Turin Polytechnic University in Tashkent, 2020, 10, 31-35.

Guskov V.V. Tractors. Theory. 1977.

Kutkov G.M. Tractors and Cars. Theory and Technological Properties. 2004.

G.I. Gladov Tractors: Device and Maintenance, 1999.

Vasiliev A.N. Python on examples. practical course in programming/ Science and Technology. Saint Peters-burg. 2016.

Mark L., We study Python. The fourth edition., St. Petersburg-Moscow., 2011.

Published

2024-12-30

How to Cite

Ikhsanova, S., & Norkulov, J. (2024). DESIGNING A DIGITAL PROTOTYPE OF TRACTOR IN THE SOLIDWORKS ENVIRONMENT TO CREATE A VIRTUAL SIMULATION OF MOVEMENT ON VARIOUS SLOPES. Acta of Turin Polytechnic University in Tashkent, 14(2), 31–36. Retrieved from https://acta.polito.uz/index.php/journal/article/view/204

Issue

Vol. 14 No. 2 (2024): Acta of Turin Polytechnic University in Tashkent

Section

Technical Science and Engineering